Model Number |
RX II-61 (Creasing) |
RX II-61 |
RX II-101S |
RX II-132S |
RX II-183S |
Operational Method |
Roller-Type |
Max. Cutting
Width |
536mm(21â€) |
610mm(24â€) |
1010mm(40â€) |
1320mm(52â€) |
1830mm(72â€) |
Max. Cutting
Length |
50m (164ft) |
Max. Media Loading
Width |
642mm(25.28â€) |
810mm(31.88â€) |
1326mm(52.2â€) |
1635mm(64.37â€) |
2145mm(84.44â€) |
Min. Media Loading
Width |
50mm (1.97in) |
Number of Pinch
Rollers |
2 |
3 |
4 |
5 |
Acceptable Material
Thickness |
0.8mm (0.03in) |
Drive Motor |
DC Servo Control |
Max. Cutting
Force |
600 g |
Max. Cutting
Speed |
1530 mm/sec (60 ips) (at 45°
direction) |
Acceleration |
4.2 G (gravity) |
Offset |
0~1.0 mm (with an increase of
0.025mm) |
Memory
Buffer |
32 MB /16 MB (when using AAS) |
Interfaces |
USB 2.0 (Full Speed), Serial (RS-232)
and Ethernet |
Type of Command |
HP-GL, HP-GL/2 |
Mechanical
Resolution |
0.006 mm |
Software
Resolution |
0.025 mm |
Distance Accuracy |
±0.254 mm or ±0.1% of move, whichever
is greater |
Repeatability |
±0.1mm |
Automatic-Aligning
System |
Completely Automatic Contour Cutting
System for print to cut solution |
Auto Rotation |
Yes |
Section Cutting |
Yes |
Curve & Arc
Smoothing |
Yes |
Configurable
Origin |
Yes |
Test Cut
capability |
Yes |
Tangential mode |
Yes |
Over Cut |
Yes |
Repeat |
Yes |
Copy |
Yes |
Control Panel |
LCD (20 digits x 2 lines), 15 Keys, 1
Power LED, 1 Green LED |
Diameter of Blade |
2.5 mm |
Power Supply |
100 ~ 240VAC 50/60Hz (auto
switching) |
Power Consumption |
251.8 watts |
Dimension (HxWxD) mm |
437 * 1098 * 479 |
1147 * 1614 * 651 |
1147 * 1923 * 651 |
1147 * 2433 * 756 |
(HxWxD) in |
17.2 * 43.2 * 18.8 |
45.2 * 63.5 * 23.8 |
45.2 * 75.7 * 23.8 |
45.2 * 95.8 * 29.8 |
Net
Weight |
25.5kg (56.22 lb) |
25kg (55.12 lb) |
61.8kg (136.2 lb) |
61.8kg (136.2 lb) |
72kg (158.4 lb) |
Auto Cut Off |
Standard |
Max. Cut Off
Width |
642mm |
696mm |
1107mm |
1417mm |
1927mm |
Stand |
Optional |
Standard |
Media Basket |
Optional |
Operation Environment |
Temperature |
15°C~30°C / 60°F~86°F |
Humidity |
25% ~ 75% |
- Compatible with Windows 7 and above & MAC OS X 10.6 and above.
(*Purchasing serial number for“Sure Cuts A Lot†software to work with
Mac OS.)
- The specification and data sheet may vary with different materials
used. In order to obtain the best output quality, please maintain the
machine regularly and properly.
- GCC reserves the right to change the specifications at any time
without notice.
- GCC certified material in tracking is Avery MPI 3000.
- The above listed specification values are effective only when
operated with media certified by GCC.
- Please note that the machine manufactured before 09/26/2017 with 2
mm diameter of blade.
|