Roland TY-300 with RDTFS800 Shaker Demo
TY-300 | | |
|---|
| Printing Method | Piezo ink-jet method |
|---|
| Media | Width | 7.2 to 30 in (182 to 762 mm) |
|---|
| Thickness | Maximum 39.3 mil (1.0 mm) with liner for printing, Maximum 15.7 mil (0.4 mm) with liner and 8.6 mil (0.22 mm) without liner for cutting |
|---|
| Roll outer diameter | Maximum 9.84 in (250 mm) |
|---|
| Roll weight | 66.1 lb (30 kg) |
|---|
| Core diameter | 3 in (76.2 mm) or 2 in (50.8 mm) |
|---|
| Printing/cutting width (*1) | Maximum 28.9 in (736 mm) |
|---|
| Ink | Type | S-PG2 INK 500 ml cartridge |
|---|
| Colors | Five colors (cyan, magenta, yellow, black, and white) |
|---|
| Printing resolution | Maximum 1,200 dpi |
|---|
| Cutting speed | 0.39 to 11.8 in/s (10 to 300 mm/s) |
|---|
| Blade force (*2) | 30 to 500 gf |
|---|
| Blade type | CAMM-1 series blade |
|---|
| Blade offset | 0.0 to 59 mil (0.000 to 1.500 mm) |
|---|
| Software resolution (cutting) | 0.98 mil/step (0.025 mm/step) |
|---|
| Media heating system (*3) | Print heater set temperature: 86 to 100°F (30 to 38°C), Dryer set temperature: 86 to 112°F (30 to 45°C) |
|---|
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) |
|---|
| Power-saving function | Automatic sleep feature |
|---|
| Rated input | 100-120 / 220-240 Vac 50/60 Hz 6.4/3.0 A |
|---|
| Power consumption | During operation | Approx. 840W |
|---|
| Sleep mode | Approx. 70W |
|---|
| Acoustic noise level | During operation | 63 dB (A) or less |
|---|
| During standby | 58 dB (A) or less |
|---|
| Dimensions (Width x Depth x Height) | 80 in x 29.5 in x 55.8 in (2,032 mm x 748 mm x 1,415 mm) |
|---|
| Weight | 300 lb. (136 kg) |
|---|
| Environment | During operation (*4) | Temperature: 68 to 82.4°F (20 to 28°C), Humidity: 40 to 60% RH (no condensation) |
|---|
| Not operating | Temperature: 41 to 104°F (5 to 40°C), Humidity: 20 to 80% RH (no condensation) |
|---|
| Included Items | Dedicated stand, Power cord, Media holders, Separating knife, Replacement blade, Cleaning liquid, Drain bottle, User's Manual, Software?VersaWorks, Roland DG Connect), etc. |
|---|
| *1 | The length of printing or cutting is subject to the limitations of the program. |
| *2 | - 500 gf is the maximum instantaneous blade force.
- The blade force must be adjusted according to details such as the media thickness.
|
| *3 | Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
Depending on the ambient temperature and media width, the preset temperature may fail to be reached. |
| *4 | Operating environment (Use in an operating environment within this range.) |
| |  |
